Tel:+86(577)8521 0099 Fax:+86(577)8523 3668 Ch En Es Ru

Blind Brass Contact Rivet Vendor

Datatime: 9/17/2019 9:08:00 AM   Visit: 825

Wenzhou Saijin Electrical Alloy Co.,Ltd (Saijin for short) specializes in producing all kinds of contact rivets,contact points,contact components,electrical accessories and silver alloy wires.

Saijin has obtained ISO9001:2015 which assure stable quality.

Tel: +86(577)8521 0099 

Fax: +86(577)8523 3668 

Email: info@wzsaijin.com

 

product description

               Blind Brass Contact Rivet

Blind Brass Contact Rivet Vendor_Blind Brass Contact Rivet

Product Material

Cu

General Description

The conductivity of copper  only second to  silver and superior to all  other metals, so it  was  used as benchmarks  for the conductive properties of the material.Not only copper  has excellent electrical conductivity, but also  high melting point (1083 ℃), good mechanical properties, corrosion resistance,  reliable for working  , long life for using , it  becomes the most widely used  conductive material.

Application Scop

The electrical contact componentscan be widely used in switches, relays, thermostats, contactors, disconnector,controllers, timers and other low-voltage apparatus.

MaterialProperties

Cu Content(wt.%) Density(g/cm³) ElecResistivity (µΩ·cm) Hardness HV (MPa) TensileStrength(MPa) Elongation(%)
≥99.90 8.89 ≤0.0177 ≥65 ≥295 ≥3

 

                  Tungsten Wu Point

Blind Brass Contact Rivet Vendor_Tungsten Wu Point

PRODUCT MATERIAL

Wu/FE

General Description

The Tungsten points are arc resistance, redectory,and less current consumption when the metal contact on surface,strong on-off current capability, good wear properties and dynamic performance hit.And its cheaper than any other metal or alloy material.

Application Scope

Mainly used in the electric products such as automobiles, motorcycles, electric horn, magneto etc.

MaterialProperties

Material Composition(%) Grain number(PCS/mm2) Density g/cm3 Hardness HV(Mpa)
Wu ≥99.95 10000-20000 ≥19.0 680

Tolerances

Head Diameter Head Thickness Shank Length Shank Diameter  Layer Thickness
±0.10 ±0.05 ±0.15 -0.02 S>0.6
      -0.1