Ch
En
Es
Ru
Datatime: 9/12/2019 9:44:00 AM Visit: 789
Wenzhou Saijin Electrical Alloy Co.,Ltd(Saijin for short) specializes in producing all kinds of contact rivets,contact points,contact components,electrical accessories and silver alloy wires.
Sajin use the material Cd free which meets the Eu RoHS&REACH requirement.
Saijin has obtained ISO9001：2015 which assure stable quality.
Saijin has owned strong R&D department,we were awarded with Zhejiang Province scientific and technological enterprise since 2016.
Tel: +86(577)8521 0099
Fax: +86(577)8523 3668
Email: info@wzsaijin.com
product description
Nickel Plating Blind Contact Rivet
Product Material
Cu
General Description
The conductivity of copper only second to silver and superior to all other metals, so it was used as benchmarks for the conductive properties of the material.Not only copper has excellent electrical conductivity, but also high melting point (1083 ℃), good mechanical properties, corrosion resistance, reliable for working , long life for using , it becomes the most widely used conductive material.
Application Scop
The electrical contact componentscan be widely used in switches, relays, thermostats, contactors, disconnector，controllers, timers and other low-voltage apparatus.
MaterialProperties
| Cu Content(wt.％) | Density(g/cm³) | ElecResistivity (µΩ·cm) | Hardness HV (MPa) | TensileStrength(MPa) | Elongation(％) |
| ≥99.90 | 8.89 | ≤0.0177 | ≥65 | ≥295 | ≥3 |
Tungsten Rivet for electric horn
PRODUCT MATERIAL
Wu/FE
General Description
The Tungsten points are arc resistance, redectory,and less current consumption when the metal contact on surface,strong on-off current capability, good wear properties and dynamic performance hit.And its cheaper than any other metal or alloy material.
Application Scope
Mainly used in the electric products such as automobiles, motorcycles, electric horn, magneto etc.
MaterialProperties
| Material | Composition（%） | Grain number（PCS/mm2） | Density g/cm3 | Hardness HV(Mpa) |
| Wu | ≥99.95 | 10000-20000 | ≥19.0 | 680 |
Tolerances
| Head Diameter | Head Thickness | Shank Length | Shank Diameter | Layer Thickness |
| ±0.10 | ±0.05 | ±0.15 | -0.02 | S＞0.6 |
| -0.1 |
