COMPANY NEWS - China Saijin Electrical Alloy

Latest News

2026 / 08 / 17

What Makes a Terminal Reliable for High-Current Applications?

A Terminals connector with oxygen-free copper construction achieves ≤1.2mΩ resistance and 50A continuous load capacity —...

Latest News

2026 / 08 / 11

Why Does Contact Resistance Matter in High-Current Connector Pins?

A Plug Pins component is the critical interface between a connector and its mating half. The 4.8mm hollow plug pin deliv...

Latest News

2026 / 08 / 04

What Makes a Tri-Metal Rivet Contact Different from Bi-Metal?

A Tri-metal Rivet Contacts features a three-layer composite structure—silver alloy on both ends and a copper core—delive...

Latest News

2026 / 07 / 27

Why Use a Silver Solid Contact Rivet?

A Silver Solid Contact Rivet offers reliable switching in a compact form. This guide covers materials, performance, and...

Latest News

2026 / 07 / 20

What Makes a Plug Pin Reliable for High-Current Applications?

A Plug Pins component is the critical interface between a connector and its mating half. The 4.8mm hollow plug pin deliv...

Latest News

2026 / 07 / 14

Reliable Switching Starts with the Right Silver Rivet Contact

A Silver Rivet Contact is a small component with an outsized impact on electrical reliability. This guide covers why sil...

Latest News

2026 / 07 / 06

Which Switch Stamped Parts Fit Your Design?

Switch stamped parts are precision components for electrical switches. Progressive stamping, phosphor bronze, silver all...

Latest News

2026 / 06 / 25

What Do Welded Stamping Parts Need for Reliable Performance?

Welded stamping parts need <0.5 mΩ contact resistance, 200 N tensile strength, and ≥0.3 mm weld penetration. Silver allo...

Latest News

2026 / 06 / 23

Why Silver Inlay Stamping Parts Outperform Solid Contacts

A silver inlay stamping part delivers solid-silver performance on the contact surface at lower cost. Silver layer ≥5μm, ...

Latest News

2026 / 06 / 10

Switch Stamped Parts That Don’t Wear Out?

Switch Stamped Parts require balanced material (phosphor bronze), stable contact force (overspec by 25-30% for heat), en...

Latest News

2026 / 06 / 02

Welded Stamping Parts: Where Do Electrical Connections Break?

A Welded Stamping Parts weld fails when resistance >0.5 mΩ, penetration <0.3 mm, or tensile <200 N. Diagnose, then repai...

Latest News

2026 / 05 / 27

What Makes a Brass Socket Stamping Part Reliable

A Socket Stamping Parts component is the conductive socket core, ensuring current transmission and plug clamping with pr...

Blog